Gladen DSP 4to6 SP-DIF
The Digital Signal Processor with 4 inputs and 6 outputs.
Like a DSP 4to6 but with digital input output
Digital inputs optical and coaxial SP-Dif
SP-Dif output (optical) with volume-regulated signal from channel 1+2.
Note: with the digital master/slave possibility you can create a 12, 16, 24, 32…
Optionals
External display/controller for presets and main controls (RDC)
Externat control for Voleme MASTER & Volume SUB
External switch for choosing the presets
INPUT MODE |
: |
Low Level (LL) / High Level (HL) |
INPUT IMPEDANCE |
: |
> 10Kohm (LL) / 47ohm (HL) |
INPUT SENSITIVITY |
: |
2Vrms ÷ 8Vrms (LL) / 5Vrms ÷ 20Vrms (HL) |
INPUT VOLTAGE REGULATION |
: |
-12dB ÷ 0dB |
MAX OUTPUT SIGNAL |
: |
4Vrms |
OUTPUT IMPEDANCE |
: |
50 ohm |
THD DISTORTION |
: |
|
FREQUENCY RESPONSE |
: |
20Hz ÷ 20KHz (within -0.1dB) |
CHANNEL SEPARATION |
: |
>75dB (@ 1KHz) |
SUPPLY VOLTAGE |
: |
11V ÷ 15V |
CURRENT CONSUMPTION |
: |
0.5A @ 12V |
GROUND ISOLATION vs CAR BODY |
: |
1Kohm |
AUTOSENSE |
: |
two operative modes (yes, HL only) |
REMOTE OUTPUT |
: |
130mA max. |
COMMUNICATION PERIPHERALS |
: |
on-board USB, Bluetooth socket, Remote controller |
Designed and made by |
: |
MOSCONI, Italy |
SIZE |
: |
150 x 125 x 40 mm (including fixing feet) |